Diabase H5 CNC LITE H5-400A

Diabase Engineering CNC LITE H5-400A

Expand your production capabilities with the combined functions of 3D printing and CNC milling.

Diabase Engineering CNC LITE H5-400A offers:

  • 3D Printer + CNC Mill
  • Single interface
  • Uninterrupted operations

What’s included in H5 CNC LITE version?

  • 3 Print Heads
  • 2 Milling Heads
  • Automatic Touch Probe
  • Desiccating Filament Cabinet
  • Push/pull Filament Drive System
  • Automatic Nozzle Cleaning Station
  • Pendant Machine Control
  • Toolplate and 3-axis Workholding
  • Full Enclosure
  • $11,750.00
Qty:  
  • SKU
    DIABCNCLITEAH5400A

Steps completed on a single computer

1 PERSON - 1 COMPUTER - 1 MACHINE
ALL IN ONE WORKSPACE

An industrial quality machine with an easy-to-use interface. Offers a simplified and shortened design cycle that cuts out the middlemen. No Assembly Required.

PRIORITIZE YOUR DESIGN
From hybrid manufacturing to multi-material printing, the H-Series expands your production capabilities to bring your design to life.

3D PRINTING + CNC MILLING
Print your own stock, and finish with fine milling - all in one setup. Mill existing parts and print directly on top for hard-to-produce designs.

UP TO 5 AXIS PRODUCTION
Manufacture 'impossible' parts with strong layer adhesion, while using less support material.

MULTI-MATERIAL PRINTING
Design for function, not a single material. Self-cleaning and priming nozzles enables the production of high quality prints with interlaced materials.

WIDE RANGE OF MATERIALS
Mill soft metals (up to 75 HRB) and print ultra flexible filaments (down to 60 ShoreA). Uses our revolutionary Flexion Extruder.

What’s included in H5 CNC LITE version?

  • 3 Print Heads
  • 2 Milling Heads
  • Automatic Touch Probe
  • Desiccating Filament Cabinet
  • Push/pull Filament Drive System
  • Automatic Nozzle Cleaning Station
  • Pendant Machine Control
  • Toolplate and 3-axis Workholding
  • Full Enclosure

More details about Diabase Engineering H5 3D Printer and CNC Mill

QUICK-CHANGE BUILD PLATFORMS
Enables rapid removal and installation of workholdings.

HANDHELD PENDANT
Provides tactile, accurate, and responsive machine control.

OMNI-DIRECTIONAL TOUCH PROBE
Allows automatic bed compensation, edge detection, center-finding, and machine calibration.

5 STATION AUTOMATIC TOOL CHANGER 
Up to 5 additive, 4 subtractive or any combination.

EASY INSTALL TOUCHPLATE
Allows quick tool offset detection.

OPEN BUILD ENVIRONMENT
Full visibility and easy open enclosure. Accessible dessicant filament cabinet.

Review from 3D Printing Nerd


H-SERIES PACKAGES

FeaturesH5-400A
HYBRID
H5-400A
CNC LITE
H5-400B
CNC FULL
Build EnclosureXXX
Pendant Machine ControlXXX
Auto Bed LevelingXXX
Milling of Printed PartsXXX
Heated BedXXX
Auto-Cleaning NozzlesXXX
3-Material PrintingXXX
Touch-Off Plate (Tool Offsets)XXX
Push-Pull Filament Drive SystemXXX
Dessicant Filament Cabinet
XX
Flat Vise (3-Axis CNC)
XX
3-Axis Edge Detection
XX
Toolplate for Workholding
XX
5 Axis Operations (A+C)
UpgradeUpgrade
4 Axis Operations (A)
UpgradeUpgrade
High-Power Spindle (100W)

X
4-Material Printing

X
14-Tool Changer

X


  • Dimensions (W x D x H)
    51 x 36 x 48 in (1300 x 910 x 1220 mm)
  • Build Volume [3 AXIS: XYZ]
    16 x 7 x 15 in (416 x 186 x 375 mm)
  • Build Volume [4 AXIS: XZA]
    16 x 11 in x (infinite drive in A) (416 x 275 mm)
  • Build Volume [5 AXIS:DHA]
    6 x 11 in cylinder (+/-100° A, infinite drive in C) (150 x 275 mm)
  • Resolution
    0.005mm
  • Mechanical Repeatability
    0.01mm
  • Axis Alignment
    1.8 arcmin
  • Max Travel Speed (mm/s)
    200 X, 200 Y, 50 Z
  • Weight
    Up to 265 lbs (120 kg)
  • Power Requirements
    1200W, 120-240V, 50/60hz, 10A
  • Machine Control
    Handheld Pendant
  • Computer Interface
    Ethernet via web browser, SBC (Raspberry Pi optional)
  • Software Requirements
    Simplify3D or Cura, Fusion360 or HSMWorks
  • Spindle Speed
    up to 12,000 RPM
  • Spindle Power
    30W
  • Chip Removal
    Compressed Air
  • Maximum Cutter Length
    up to 1.57in (40 mm)
  • Cutter Shank Diameter
    0.125in (3.18 mm)
  • Filament Diameter
    1.75mm
  • Min Filament Durometer
    60 Shore A
  • Max Extruder Temperature
    300°C
  • Filament Type
    Any
  • Nozzle Sizes
    0.15 and 1.2 mm diameter
  • Build Plate
    Kapton with quick-release magnetic latches
  • Max Bed Temperature
    100°C
  • Min Filament Cabinet Humidity
    2%RH (at 25°C)
  • Manufacturer
    Diabase Engineering
  • Brand
    Diabase Engineering

Related products

Drop items here to shop
Product has been added to your cart