Flexion for E3D Retrofit kit for E3D Hotend

Out of stock

Flexion for E3D Retrofit kit for E3D Hotend  

3D printer extruder retrofit kit for E3D v6 hotend (1.75mm). This allows the use of the Flexion Extruder with the excellent E3D hotends – enabling precision extrusion of virtually every available filament from Nylon to ultra-flexible Shore 50A. This uses the same mounting hole pattern as the E3D extruder, and also has a couple mounting holes in the front (see drawing). It includes a PTFE tube cut to length for the E3D v6 hotends. So you will have all the same advantages of precision, supported, reliable filament driving with the flexibility to print at much higher temperatures. This kit is appropriate for RepRap and Lulzbot printers by following instructions here.

  • $99.00
  • SKU

Flexion extruder with an E3D mount. Comes with everything shown in the box:

  • Flexion extruder
  • E3D mounting block
  • PTFE tube that fits the E3D v6 hotend (plus a spare)
  • Clamp plate and mounting screws
  • Spare brush
  • Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm

Mounting block and mounting hardware
Tensioning arm with idler and cleaning brush (one right and one left)
Adjustment cam
Drive gear
Nozzles: 0.2, 0.3, 0.4, and 0.5 mm orifice
2 PTFE feed tubes
Spare cleaning brushes
“Flexion inside” quick-guide sticker

Note: does not include stepper motor or hotend

Weight2 oz
  • Manufacturer
    Diabase Engineering
  • Brand
    Diabase Engineering