To find the best temperature one could start from the lower end of the recommended settings and increase the bed temperature in 5 °C increments. This should be done with standardized calibration prints..
An additional benefit of Magigoo Pro - Glass filled Polypropylene, being thermally activated, is that it will release the print upon cooling. Again, different printers, print surfaces or filaments will have slightly different released conditions but as a general rule a reduction in temperature of 30-40 °C will be sufficient to remove your prints without any effort.
The best and most reliable performance is achieved when applied as a thin layer. This means that cleaning and re-applying between prints is recommended especially on longer prints or hard to print with materials.
Magigoo Pro PPGF compatibility
- Xstrand (TM) GF30-PP by Owens Corning
- BASF/Innofil3D PP GF30
- other PP plastics that require extra adhesion
How to use?
Caution when using! Contact with eyes causes serious eye damage. Wash hands and exposed skin thoroughly after handling.
User Manual. 5 years of research by the Magigoo team in one document (81 pages): Download PDF
Database of tested materials. They tested all these filaments, matched with recommended Magigoo products, and included optimised print settings for them - View online