Sinterit SLS Powder

Sinterit SLS Powder

Products: 19 of 9
Drop items here to shop
Product has been added to your cart
  • Sinterit PA12 Smooth PRINT READY Powder

    Sinterit PA12 Smooth PRINT READY Powder

    A Polyamide 12 powder (nylon) for use with Sinterit Printers with good mechanical properties and excellent surface resolution, suitable for high-temperature applications and parts that need to tolerate heat.

    Comes in 2kg carton – 4 liters

    • $140.00
  • Sinterit PA12 Smooth FRESH Powder

    Sinterit PA12 Smooth FRESH Powder

    Optimized for use in Sinterit Lisa or Sinterit Lisa Pro SLS 3D Printers. The PA12 Smooth Fresh powder produces high strength prints that are resistant to breaking under stress and prints remain strong across a wide range of temperature.  This material absorbs very little moisture and resists penetration from fluids, oils, fuels, grease, and solvents. The product dampens noise and vibration, and can be post processed by cutting, drilling, painting or coating. Any un-sintered PA12 Smooth Fresh powder is fully reusable with a low 30% refresh rate for efficient and cost-effective performance.

    Comes in 2kg carton – 4 liters

    • $260.00
  • Sinterit FLEXA Bright Powder

    Sinterit FLEXA Bright Powder

    FLEXA Bright Powder – 2 kg


    A functional rubber material that you can dye to other colors


    FEATURES:

    • Flexible
    • Dyeable
    • Brightly colored

    APPLICATIONS:

    • pre-surgery and training printouts in the medical industry
    • flexible prototypes
    • clothing parts,
    • mock-ups and models
    • $570.00
  • Sinterit PA11 Onyx FRESH Powder

    Sinterit PA11 Onyx FRESH Powder

    PA11 Onyx FRESH Powder – 2 kg

    A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.

    FEATURES:

    • high resistance against impacts
    • moderate elasticity
    • good chemical resistance
    • dedicated only for LISA Pro (requires a nitrogen chamber)

    APPLICATIONS:

    • jigs, fixtures
    • tools elements
    • covers, housings, enclosures
    • snap-fit designs
    • handles, hinges, connectors
    • impact-proof elements
    • thermoforming molds
    • $300.00
  • Sinterit PA11 Onyx PRINT READY Powder

    Sinterit PA11 Onyx PRINT READY Powder

    PA11 Onyx PRINT READY Powder – 2 kg

    A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.

    FEATURES:

    • high resistance against impacts
    • moderate elasticity
    • good chemical resistance
    • dedicated only for LISA Pro (requires a nitrogen chamber)

    APPLICATIONS:

    • jigs, fixtures
    • tools elements
    • covers, housings, enclosures
    • snap-fit designs
    • handles, hinges, connectors
    • impact-proof elements
    • thermoforming molds

    Print Ready is suitable ONLY for first printing with PA11.

    • $240.00
  • Sinterit FLEXA Soft Powder

    Sinterit FLEXA Soft Powder

    FLEXA Soft Powder – 2 kg

    Low Shore-A material that could be used in design, art and simulation of really soft materials

    FEATURES:

    • Soft, with low A-shore value
    • Elastic prints

    APPLICATIONS:

    • gaskets
    • medical models
    • sensory toys
    • clothing parts
    • $510.00
  • Sinterit TPE PRINT READY Powder

    Sinterit TPE PRINT READY Powder

    TPE PRINT READY Powder – 2 kg

    With TPE it is possible to print functional prototypes such as pumps, bellows, gaskets and other elastic solutions dedicated to work in difficult conditions

    FEATURES:

    • Elastic
    • Durable
    • Dense
    • After sealer covering – watertight & airtight

    APPLICATIONS:

    • shoes/insoles parts (wear resistance)
    • watertight/airtight items
    • gaskets
    • skin-touch applications for rubbers
    • footwear prototypes,
    • hoses and tubes – it’s water/air tight
    • shock absorbers

    Material type: TPE
    Shore hardness type A scale: 90
    Tensile Strength: 6.0 [MPa]
    Elongation at break: 196%
    Melting point: 190°C

    Print Ready is suitable ONLY for first printing with TPE.

    • $440.00
  • Sinterit FLEXA Grey Powder

    Sinterit FLEXA Grey Powder

    Flexa Grey powder from Sinterit delivers flexible prints with impressive extensibility. This Thermoplastic Polyurethane Elastomer (TPU) material has properties similar to rubber.  It is both highly elastic and durable. Optimized for use with the Sinterit Lisa and Sinterit Lisa PRO it is ideal for prototyping or making flexible parts such as gaskets or joint covers.

    • $350.00
  • Sinterit Sealer for TPE

    Sinterit Sealer for TPE

    A liquid pre-vulcanized rubber sealant substance for TPE


    After being dipped, printouts become hermetic and resistant against high pressure and aggresive liquids such as fuel or solvents.

    • $200.00