3DXTech

3DXTech

Products: 111 of 11
Drop items here to shop
Product has been added to your cart
  • CarbonX Carbon Fiber PEEK

    CarbonX Carbon Fiber PEEK

    CarbonX Carbon Fiber Reinforced PEEK 3D Filament 

    CarbonX PEEK  is one of the premier polymers in FFF/FDM 3D Printing.  Made using 10% high-modulus chopped carbon fiber for exceptional stiffness, strength, and dimensional stability.  

    PEEK is one of the highest performance thermoplastics ever invented.  It is used in some of the most demanding applications such as seals, gears, bushings, bearings, and pump & compressor components.  Industries such as Auto, Aerospace, Defense, Semi-conductor, and Oil/Gas depend on PEEK for applications where failure is not an option.  

    Print Carbon Fiber PEEK parts with Gearbox HT2 High-Temp 3D Printer.  

    CarbonX PEEK Properties Include:

    • Superior Mechanical Properties, especially at elevated temperatures
    • Excellent Chemical Resistance
    • Low Coefficient of Linear Thermal Expansion (CTE)
    • Near Zero Moisture Absorption
    • Low smoke and toxic gas emissions

    PEEK has an excellent resistance to hydrolysis in boiling water and superheated steam (sterilization/autoclave) at temperatures in excess of 250°C (482°F).

    Only 9 left in stock
    • $195.00
  • FluorX Kynar PVDF

    FluorX Kynar PVDF

    FluorX PVDF Polyvinylidene Fluoride is made using Arkema Kynar. PVDF is an excellent choice for applications that require chemical resistance, high-heat resistance, and superior abrasion resistance.

    Only 10 left in stock
    • $135.00
  • ThermaX PEKK-C

    ThermaX PEKK-C

    ThermaX PEKK-C 3D Printing Filament (PolyEtherKetoneKetone) is made using Arkema Kepstan PEKK (70/30 copolymer) and is one of the highest performance materials in the world while also being one of the easiest to print ultra-polymers. A leading material in the PAEK family, PEKK has exceptionally good mechanical, thermal, and chemical resistance properties. It is also not only substantially easier to print than PEEK, it’s one of the easiest ultra-polymers to 3D print period.

    Only 10 left in stock
    • $225.00
  • SimuBone™ Bone Modeling Filament

    SimuBone™ Bone Modeling Filament

    SimuBone™ Bone Modeling Filament is the latest technology in anatomical bone modeling materials. It is ideal for use in both educational and clinical settings as a replacement for cadaver bone and for patient-specific preoperative surgical planning. Plus, SimuBone™ is ISO 22196:2011 certified antibacterial and our formulation is produced in an ISO 13485 compliant facility.

    Only 9 left in stock
    • $98.00
  • AquaTek X1 Advanced USM Universal Support Material - Natural

    AquaTek X1 Advanced USM Universal Support Material - Natural

    AquaTek™ X1 Advanced USM [Universal Support Material] is an advanced water-soluble support filament that was formulated specifically for printing complex parts. This material is compatible with the widest variety of model materials [PLA, ABS, NYLON, Carbon Fiber, Glass Fiber, and more!] and then it safely washes away in warm water so you don’t destroy your part removing the support.

    Only 4 left in stock
    • $90.00
  • Obsidian PA6+CF [Markforged  Onyx Alternative]

    Obsidian PA6+CF [Markforged Onyx Alternative]

    Obsidian™ PA6+CF is an excellent drop-in replacement for Markforged Onyx™ and is compatible for use in all Markforged printers.  Obsidian™ delivers excellent performance, appearance, and a significant cost savings.

    Only 5 left in stock
    • $130.00
  • 3DXSTAT ESD ABS

    3DXSTAT ESD ABS

    3DXSTAT ESD-Safe ABS 3D FILAMENT

    3DXSTAT ESD ABS is an advanced ESD-Safe filament formulated for a wide array of applications that require electrostatic discharge (ESD) protection and thermal stability up to 95°C. Made using high flow ABS and CNT’s to offer exceptional repeatability and reliability. 

    Target surface resistance: 10^7 to 10^9 Ohm. Compare to Stratasys ABS-ESD7 in performance and price and you’ll never go back! Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.

    3DXSTAT ESD ABS is an advanced ESD-Safe compound designed for use in critical applications which require electrostatic discharge (ESD) protection and a high level of cleanliness. Manufactured with consistency in mind, 3DXTECH starts with premium ABS and then compounds it according to a proprietary formulation of multi-wall carbon nanotubes – giving you a filament with excellent printing characteristics and consistent ESD properties.

    • $110.00
  • CarbonX PEEK+CF10

    CarbonX PEEK+CF10

    CarbonX 10% Carbon Fiber Reinforced PEEK+CF10 3D Filament 

    CarbonX PEEK+CF10  is one of the premier polymers in FFF/FDM 3D Printing.  Made using 10% high-modulus chopped carbon fiber for exceptional stiffness, strength, and dimensional stability.  

    PEEK is one of the highest performance thermoplastics ever invented.  It is used in some of the most demanding applications such as seals, gears, bushings, bearings, and pump & compressor components.  Industries such as Auto, Aerospace, Defense, Semi-conductor, and Oil/Gas depend on PEEK for applications where failure is not an option.  

    Print Carbon Fiber PEEK parts with Gearbox HT2 High-Temp 3D Printer.  

    CarbonX PEEK Properties Include:

    • Superior Mechanical Properties, especially at elevated temperatures
    • Excellent Chemical Resistance
    • Low Coefficient of Linear Thermal Expansion (CTE)
    • Near Zero Moisture Absorption
    • Low smoke and toxic gas emissions

    PEEK has an excellent resistance to hydrolysis in boiling water and superheated steam (sterilization/autoclave) at temperatures in excess of 250°C (482°F).

    Only 1 left in stock
    • $195.00
  • ThermaX PEI Ultem 9085

    ThermaX PEI Ultem 9085

    ThermaX PEI 3D Filament, Made using ULTEM 9085 PEI 

    The company manufactures this ultra-performance 3D printing filament using ULTEM 9085 PEI (polyether imide) resin.  Filaments made from ULTEM 9085 resin offers the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 186°C.  PEI is an amorphous, high-performance polymer that combines excellent thermal properties, exceptional dimensional stability, inherent flame retardancy, and good chemical resistance.  

    Product attributes include:

    • High thermal properties; (Tg) of 186°C
    • Inherent flame resistance with low smoke evolution and low smoke toxicity
    • Long-term hydrolytic stability 
    • Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
    • Exceptional strength and modulus, even at elevated temperatures
    • Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
    • Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies


    Only 10 left in stock
    • $80.00
  • CarbonX PEI + CF Ultem 1010

    CarbonX PEI + CF Ultem 1010

    CarbonX CF-PEI 3D Printing Filament, Made using ULTEM PEI

    We manufacture CarbonX Carbon Fiber Reinforced PEI (Polyether Imide) using a custom-formulated compound made from ULTEM PEI resin and high-modulus carbon fiber.  PEI is an amorphous, high-performance polymer that offers excellent mechanical, thermal, and chemical resistance properties.  Our PEI based filaments offer the ability to create parts with excellent properties at elevated temperatures due to a high glass transition temperature (Tg) of 217°C.  The addition of high-modulus carbon fiber greatly increases the stiffness / modulus of the material as well as greatly improving dimensional stability during and after printing. 

    Print industrial-grade Carbon Fiber PEI parts with Gearbox HT2 High-Temp 3D Printer.  

    Product attributes include:

    • High thermal properties: (Tg) of 217°C
    • Inherently flame retardant
    • Long-term hydrolytic stability 
    • Excellent dimensional stability (low creep sensitivity and low, uniform coefficient of thermal expansion) and highly reproducible part-to-part dimensions
    • Exceptional strength and modulus, even at elevated temperatures
    • Good resistance to a broad range of chemicals, such as automotive fluids, fully halogenated hydrocarbons, alcohols, and aqueous solutions
    • Stable dielectric constant and dissipation factor over a wide range of temperatures and frequencies
    Only 10 left in stock
    • $175.00
  • CarbonX Nylon PA6 + CF (GEN 3)

    CarbonX Nylon PA6 + CF (GEN 3)

    Gen3 CarbonX Carbon Fiber Reinforced Nylon PA6 3D Filament

    Gen 3 CarbonX CF-Nylon Filament is formulated using a PA6 copolymer reinforced with high-modulus carbon fiber.  This filament is ideal for anyone that desires a structural component with high modulus, improved chemical and thermal resistance, excellent surface quality, and ease of printing.  Gen3 has higher HDT than our previous grades (147°C at .45MPa) allowing for expanded use in higher-temp applications. 

    Carbon Fiber Printer:  Print industrial-grade CF-NYLON parts with Gearbox HT2 High-Temp 3D Printer.  

    Open Source:  You do not need to purchase a special printer for CarbonX CF-Nylon.  Our CF Nylon (Gen 3) is suitable for use in practically any desktop 3D Printer that has a heated bed.  

    Hardened Nozzles:  Carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.  We recommend A2 Hardened Steel Nozzles.

    • $58.00