PolyMide CoPA

In stock (3 items available)

PolyMide is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free technology, PolyMide filaments deliver engineering properties intrinsic to Nylon and ease of printing.

PolyMide CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180˚C.

  • $49.99
Qty:  
  • SKU
    PM70809

PolyMide CoPA features Polymaker's Warp-Free technology: Warp-Free technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.

It is highly recommended to use the PolyBox when printing with PolyMide CoPA and to store it in the resealable bag. To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide CoPA 3d printed model. Annealing settings: 70˚C for 2h

When used extensively, PolyMide CoPA can be abrasive to brass nozzles. When using PolyMide CoPA, we recommend to switch to a wear resistant nozzle such as hardened steel nozzle.

Technical Data Sheet - Download

SafetyData Sheet - Download

  • Brand
    Polymaker
  • Color
    Black, Natural
  • Size
    750 g
  • Material Type
    CoPA
  • Diameter
    1.75 mm, 2.85 mm
  • Manufacturer
    Polymaker
  • Brand
    Polymaker
  • Nozzle Temperature
    250˚C – 270˚C
  • Glass Transition Temperature
    67˚C
  • Charpy Impact Strength
    9.6 ± 1.4 kJ/m2
  • Bending Strength
    97.0 ± 1.1 Mpa
  • Tensile Strength
    66.2 ± 0.9 Mpa
  • Young’s Modulus
    2223 ± 199 Mpa
  • Drying Settings
    80˚C for 12h
  • Cooling Fan
    OFF
  • Bed Surface
    Glass with glue
  • Bed Temperature
    25˚C – 50˚C
  • Printing Speed
    30mm/s – 50mm/s
  • Vicat Softening Temperature
    180˚C
  • Melting Temperature
    190˚C