PolyTerra PLA +

In stock (2 items available)

PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

  • $21.99
Qty:  
  • Weight
    2 lbs
  • SKU
    PM70945

PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.

P

Printing Temperature: 190˚C - 230˚C
Bed Temperature: 25˚C - 60˚C
Printing Speed: 30mm/s - 70mm/s
Fan: ON

Direct Drive:
Retraction Distance: 1mm
Retraction Speed: 20mm/s
Indirect Drive:
Retraction Distance: 3mm
Retraction Speed: 40mm/s

Drying Settings: 55˚C for 6h
(Only if the material has absorbed moisture)

No, PolyTerra™ PLA+ has a more silky finish.

More data about this product

Technical Data Sheet - Download

SAfety Data Sheet - Download

  • Brand
    Polymaker
  • Color
    Black, White, Grey, Red, Blue, Green
  • Size
    1 kg
  • Material Type
    PLA+
  • Diameter
    1.75 mm
  • Manufacturer
    Polymaker
  • Brand
    Polymaker
  • Nozzle Temperature
    190˚C - 230˚C
  • Printing Speed
    30mm/s – 70 mm/s
  • Bed Temperature
    25˚C – 60˚C
  • Bed Surface
    Glass, Blue Tape, BuilTak
  • Cooling Fan
    ON
  • Young’s Modulus (X-Y)
    1951 ± 51 MPa
  • Tensile Strength (X-Y)
    27.0 ± 0.5 MPa
  • Bending Strength
    49.5 ± 1.8 MPa
  • Charpy Impact Strength
    5.76 ± 0.85 kJ/m2
  • Glass Transition Temperature
    59 °C
  • Vicat Softening Temperature
    62 °C
  • Melting Temperature
    161 °C
  • Drying Settings
    55˚C for 6h
  • Recommended Support Materials
    Self-support

Related products

Drop items here to shop
Product has been added to your cart